Pirates on the Water

, ,
I didn't expect to totally fall in love with Patterns for Pirates latest release, the Women's Loggers, but P4P knocked it out of the park again with a design loaded with options.

{ICYMI, Loggers are the love child of leggings and joggers...}


After making a pair of loungewear shorties and a pair of full-length pants from the pattern, I couldn't shake the vision of swim shorts for paddle-boarding.

I had a load of swim fabric on hand already. My pattern was already assembled from my previous makes. An opportune hour of free time smiled my way. Before I knew it, I had these adorable new shorties in my life.


{No cats were harmed in the making of these Loggers.}

I wasn't prepared for the overwhelming reception by the amazing P4P community of sewists. Many asked for the pattern hack.

So, here we go! Let's make swim shorties!
  1. Cut the pattern pieces per the pattern instructions.

  1. Cut two additional strips of fabric, 1.5" x 36". These will be your side ties.
  2. Sew together each of your center seams, leaving the outside leg seams open.


  1. Fold and press your leg bindings in half and attach to bottom of leg openings. Be sure to match your center points on the binding and legs. The center point of each will not line up at the center seam.

  1. With right sides together, sew a 5/8" seam along the outside leg seams and press open. Do not use a serger for this step. You are creating casings for your side ties.

I chose to finish my raw edges with a serger, but this is not required.
  1. Create a casing on each side of each outside leg seam by sewing a 1/2" seam. This will secure the edges and provide a new home for your side ties.


  1. Create your ties by sewing the right sides of your fabric strips together. Turn to the right side with your favorite turning tool. Cut each strip in half so that you have four ties.

  1. Insert one tie into each casing and secure the top edges in place with a basting stitch.

  1. Attach your choice of Logger's waistband options per pattern instructions.
  2. Once you try on and ruche or gather the edges to your preferences, tie a pretty side bow and cut the tie length to your liking!


And you're ready to have the cutest booty on the lake!

If you have any questions, please feel free to reach out to me. I'll be happy to help.

One last note... if you post your makes to social media using the hashtag, #loggers, be prepared for a rash of unusual new followers who cut down trees for a living.

True story.